tarm 9G OPSL
Demanding graphics projections or projections over long distances are no problem for this impressive unit.
Including waterproof flightcase
- 9'000 mW guaranteed power
- Complex graphics capable - 45kpps @ 8 ° scanners – upgradable to 60kpps
- OPSL laser source - ca. 4.5 mm beam diameter, low divergence <0.5 mrad
- Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
- Integrated network switch for linking control signal
- Control screen for convenient mode selection
- Rugged tour grade compact housing
- Incl. waterproof flightcase
ShowNET mainboard as standard:
- Various control options: ILDA, Professional DMX (two modes), Professional Art-Net (two modes), Stand-Alone Operation, Master-Slave, ILDA Streaming Receiver, LAN (Computer control, integrated DAC)
- Create custom content, store it inside the laser and play it back in different modes
- Free laser show control software included
STAND-ALONE MODE:The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX MODE:The laser can be controlled with a standard DMX controller or DMX software.
ArtNET Control mode
MASTER-SLAVE MODE:One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN MODE:The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA MODE:The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA Streaming
SHOWNET INSIDE:The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
SHOWEDITOR INCLUDED:The full version of the laser show control software Showeditor is included in delivery.
PANGOLIN FB4:Order your laser standard equipped with the Pangolin FB4 DAC. The FB4 substitutes the ShowNET mainboard, so features are limited to the ones of the FB4.
With the FB4 integrated, the laser can be directly controlled via Pangolin software.
SCANNER UPGRADE CT-6210H:Upgrade the scanner performance with the powerful CT-6210H Scanners with Laseranimation Turboscan drivers.
GOBO WHEEL:Add awesome glass effects and gratings to the laser show with this additional effects wheel.
The tarm 9G OPSL units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 9G OPSL comes with integrated ShowNET network interface and free laser show software.
- 9'000 mW guaranteed output power after optics
- very fast maximum scan speed of 45kpps @ 8 ° for graphics projection
- Very high beam accuracy and beam shape due to the Coherent Taipan OPSL sources, so these units are suitable for demanding professional applications
- Integrated network switch for linking the control signal
- Robust and dustproof housing, which also makes it possible to use it outdoors without problems
The tarm 9G OPSL has very good specifications with a beam diameter of ca. 4.5 mm and a beam divergence of only <0.5 mrad (full angle).
It is equipped with a green (10'000 mW / 530 nm) Coherent Taipan OPSL module. Other OPSL setups are also available on request.
The tarm 9G OPSL devices have very fast scanners, running at 45kpps @ 8 ° and scanning a maximum scan angle of 50°, upgrades to CT-scanners with >60 kpps@8° ILDA, LAS Turboscan driver and a deflection angle of up to 70° are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.
This show laser light has a switchable scan safety.
The housing of the tarm 9G OPSL is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.
The tarm 9G OPSL is especially suitable for demanding show laser applications and graphics projections at multimedia projects, installations, at festivals and on big stages. It is also suitable for sky laser and landmark laser applications
+ Integrated ShowNET incl. free laser show software
The tarm 9G OPSL features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 9G OPSL for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played back from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.
> More details
ShowNET Internal Control:
DMX Control
ArtNet Control
Automatic / Stand Alone
Master-Slave
ILDA Streaming
External ILDA Standard Control:
Analog ILDA
Optional control options (modification required!):
Optional control options require modifications to the general laser setup. Other operation modes or compatibilities may get lost.
Quickshow
Beyond
> More details
Download Technical Datasheet
+41-71-6778080
+44-161-8720272
Distributed brands: