tarm 6 OUTDOOR
IP65 waterproof laser system, suitable for outdoor use and fixed installations.
- IP65 waterproof housing
- 6'000 mW guaranteed power
- Graphics capable - 45kpps @ 8° ILDA Scanners
- Full color mixing - analog modulation
- Extremely sharp intense beams - low divergeance of <0.6 mrad
- Control screen (internal) for convenient mode selection
- Free computer control software - Showeditor - upgradable to Showcontroller
- Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
- Multiple control modes - stand-alone, ArtNET, LAN and ILDA streaming
ShowNET mainboard as standard:
- Various control options: Professional Art-Net (two modes), Stand-Alone Operation, ILDA Streaming Receiver, LAN (Computer control, integrated DAC)
- Create custom content, store it inside the laser and play it back in different modes
- Free laser show control software included
STAND-ALONE MODE:The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
ArtNET Control mode
LAN MODE:The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA Streaming
SHOWNET INSIDE:The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
SHOWEDITOR INCLUDED:The full version of the laser show control software Showeditor is included in delivery.
PANGOLIN FB4:Order your laser standard equipped with the Pangolin FB4 DAC. The FB4 substitutes the ShowNET mainboard, so features are limited to the ones of the FB4.
With the FB4 integrated, the laser can be directly controlled via Pangolin software.
SCANNER UPGRADE CT-6210H:Upgrade the scanner performance with the powerful CT-6210H Scanners with Laseranimation Turboscan drivers.
To cope with varying temperatures, the tarm OUTDOOR units are equipped with an active watercooling system, that is built into the housing. An active heating system helps to keep the laser systems operational even at low temperatures. Thus the tarm 6 OUTDOOR lasers can be used at environmental temperatures between -10°C and +45°C. A CT Scanner upgrade with LAS Turboscan drivers is available for the tarm 6 OUTDOOR to achieve top end quality graphics results.
The tarm 6 OUTDOOR show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 6'000 mW after optics.
The tarm 6 OUTDOOR units have a built-in network DAC for Showcontroller, Showeditor, Touchdesigner, MadLaser, etc., but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3) and ILDA streaming. They also have a built-in memory with pre-set patterns, that can be easily triggered through ArtNet and automatic mode.
The tarm 6 OUTDOOR comes with integrated ShowNET network interface and free laser show software. Details in the box below.
The benefits include:
- 6'000 mW guaranteed output power
- a very fast maximum scan speed of 45kpps @ 8° ILDA for graphics projection
- high-precision diode arrays provide an excellent beam divergence of less than <0.6 mrad for a low beam diameter
- pure diode laser
- novel method for increasing the beam precision of the diodes
- beautiful colors and good color fading
- the tarm 6 OUTDOOR impresses with very bright 637 nm red diodes
The tarm 6 OUTDOOR laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than <0.6 mrad.
It is equipped with a bright red (2'000 mW / 637 nm), a green (2'000 mW / 520 nm), and a blue (2'500 mW / 450 nm) diode laser source.
The scanners are very fast with 45kpps @ 8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210 scanners with 60 kpps@8° ILDA and a max. scan angle of 60°.
+ Integrated ShowNET incl. free laser show software
The tarm 6 OUTDOOR features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 6 OUTDOOR for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. It is also possible to trigger single frames via ArtNet. Custom frames and shows can be played from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different ArtNet modes:
(1) DJ Mode with the most used features for beginners. Only a few channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all ArtNet features especially for users with an ArtNet capable console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.
> More details
Download Technical Datasheet
+41-71-6778080
+44-161-8720272
Distributed brands: