RTI NEO S12
A six head robust professional full color laser with full X/Y scanning and six Integrated ShowNET DACs for control via LAN as well as 5 Pin DMX for standard DMX control. Perfect for large indoor events with single beam projection and creating great stage effects for nearly any size of venue when utilising the in-built pre-set patterns.
- 12 W guaranteed power
- 6 x RGB Diode Modules
- 6 x X/Y Scanners - 45 kpps@8°
- Maximum scan angle of 45°
- Full color mixing - analog modulation
- Extremely sharp beams - low divergence
- Professional DMX with customizable patterns
- Distributed scanning across the 6 laser outlets (software depending)
- Direct control via LAN by various software programs
- like MadMapper/MadLaser, TouchDesigner, Millumin, Showcontroller, Showeditor, etc.
- Rugged tour-grade compact housing
ShowNET mainboard as standard:
- Various control options: Professional DMX (two modes), Professional Art-Net (two modes), Stand-Alone Operation, Master-Slave, LAN (Computer control, integrated DAC)
- Create custom content, store it inside the laser and play it back in different modes
- Free laser show control software included
STAND-ALONE MODE:The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX MODE:The laser can be controlled with a standard DMX controller or DMX software.
ArtNET Control mode
MASTER-SLAVE MODE:One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN MODE:The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
SHOWNET INSIDE:The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
SHOWEDITOR INCLUDED:The full version of the laser show control software Showeditor is included in delivery.
The RTI NEO S12 is a whitelight RGB beam array with analog modulation and six beam outlets. It is controlled through the six intergrated ShowNET cards and thanks to their versatility it is suitable for easy implementation to existing lighting setups. Each beam output comes with its own XY scan set with 45 kpps@8°.
Besides the single beam, the RTI NEO S12 offers more than 100 standard pre-set patterns (stored on SD card via ShowNET) which are customizable
Besides the single beam, the RTI NEO S12 offers more than 100 standard pre-set patterns (stored on SD card via ShowNET) which are customizable
The RTI NEO S12 is equipped with 6 RGB laser diode modules.
Each RGB module is balanced at a power of 6 x 600 mW / 638 nm red, 6 x 500 mW / 520 nm green and 6 x 900 mW / 450 nm blue for a brilliant white balance. Powers are measured after apertures and are balanced on manufacturing.
The RTI NEO S12 is controlled via ShowNET thus it is possible to use it with different software programs like MadMapper/MadLaser, TouchDesigner, Milumin, Showcontroller PLUS and Showeditor as well as DMX and artNET. The beam array can easily be integrated into an existing lighting setup.
A great visual effect for stages, live gigs, nightclubs, show productions and any event which requires a unique visual enhancement.
> More details
ShowNET Internal Control:
DMX Control
ArtNet Control
Automatic / Stand Alone
Master-Slave
ILDA Streaming
> More details
Download Technical Datasheet
+41-71-6778080
+44-161-8720272
Distributed brands: