Laserworld CS-24.000RGB FB4
- 24'000 mWRGB pure diode laser system
- Pangolin FB4 interface
- DMX / ArtNet controllable
- Stand-alone mode
- Computer controllable via FB4 interface (requires QuickShow or BEYOND software)
- Basic graphics capability - 30 kpps @ 8° scanners
- Analog modulation
- Laser beam masking plate on front panel
- 360° mounting bracket
- IP54 enclosure
STAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
ArtNET Control mode
LAN MODE:
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA MODE:
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
FB4 INTEGRATED:
The laser can be controlled through the integrated Pangolin FB4 board
Via the internal FB4 interface, the Laserworld CS-24.000RGB FB4 offers various control options, including DMX, ArtNet as well as direct computer control via network (QuickShow software or BEYOND software required).
But that's not all the Laserworld CS-24.000RGB FB4 has to offer:
The Laserworld CS-24.000RGB FB4 is an analog modulated, full-color RGB diode laser system with a guaranteed output power of 24'000 mW. The red laser source has an output power of 5'500 mW / 638 nm, the green of 6'500 mW / 520 nm and the royal-blue laser source has an output power of 12'000 mW / 450 nm. The diode laser sources provide strong laser beams. The projector has good beam specifications with a beam diameter of approximately ca. 6 mm and a beam divergence of 1.3 mrad. The galvo system has a scan speed of up to 30 kpps @ 8°.
There is no air circulation in the optical area, the temperature is regulated via the separate heat sink section. This reduces maintenance and cleaning work to a minimum.
The pre-stored effects and animations (from QuickShow - BEYOND) can be called up via DMX / ArtNet and adjusted live in color, position or with additional effects.
The Laserworld CS-24.000RGB FB4 also offers direct computer control via Pangolin QuickShow or BEYOND. This allows you to project your own or pre-programmed laser shows, logos, texts or your own graphics and animations.
The Laserworld CS-24.000RGB FB4 show laser projector comes with a compact housing that is lightweight and has a stable 360° bracket. The bracket allows various mounting positions: both hanging and standing installations are possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations on a truss or on the ceiling.
The Laserworld CS-24.000RGB FB4 is ideal for semi-professional applications and is perfect for medium to large clubs and discotheques as well as for smaller festivals or stages and in any other party location.
> More details
Download Technical Datasheet
+41-71-6778080
+44-161-8720272
Distributed brands: