Laserworld CS-12.000RGB ShowNET
- 12'000 mW RGB pure diode laser system
- ShowNET inside
- DMX / ArtNet controllable
- Stand-alone mode
- Computer controllable via ShowNET interface (requires Showeditor or Showcontroller software)
- Basic graphics capability - 30 kpps @ 8° scanners
- Analog modulation
- Laser beam masking plate on front panel
- 360° mounting bracket
- IP54 enclosure
ShowNET mainboard as standard:
- Various control options: ILDA, Professional DMX (two modes), Professional Art-Net (two modes), Stand-Alone Operation, ILDA Streaming Receiver, LAN (Computer control, integrated DAC)
- Create custom content, store it inside the laser and play it back in different modes
- Free laser show control software included
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
The laser can be controlled with a standard DMX controller or DMX software.
The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
The full version of the laser show control software Showeditor is included in delivery.
The Laserworld CS-12.000RGB ShowNET is a pure diode, analog modulated, full color RGB laser system with a guaranteed output power of 12'000 mW. The red laser source has an output power of 3'000 mW / 638 nm, the green of 3'000 mW / 520 nm and the royal-blue laser source has an output power of 6'000 mW / 450 nm. The diode laser sources ensure powerful laser beams. The projector has good beam specifications with a beam diameter of 5 mm and beam divergence of 1.2 mrad. The galvo system has a scan speed of up to 30 kpps @ 8°.
Pattern size can be set by two rotary buttons on the rear side of the housing.
There is no airflow in the optical compartment, the temperature is regulated through the separate cooling fins compartment. This reduces maintenance and cleaning requirements to a minimum.
Through DMX, in the stand-alone mode. about ca. 130 (layers, tunnels, fences, waves, etc.), effects gratings can be projected in different colors and in various speed.
Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX cable to a main projector (master projector) project the same patterns like the master projector.
The Laserworld CS-12.000RGB ShowNET is computer controllable through a professional ILDA interface. Thus own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller).
There are safety features like a key switch, an interlock and an on-off switch.
The Laserworld CS-12.000RGB ShowNET show laser projector comes with a compact housing, which is light weight and has a stable bracket. The 360° mounting bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.
The Laserworld CS-12.000RGB ShowNET is ideal for semi-professional applications and is perfectly suitable in medium sized to large clubs and discos as well as for Small to medium-sized festivals.
> More details
ShowNET Internal Control:
DMX Control
ArtNet Control
Automatic / Stand Alone
Master-Slave
ILDA Streaming
External ILDA Standard Control:
Analog ILDA
> More details
Distributed brands: