Laserworld BeamBar 10R MK3
- 1'200 mW guaranteed total output power
- 10 red diode modules
- Easy laser alignment via the front plate
- Brightness control - analog modulation
- DMX programmable
- Automatic, stand-alone, and master-slave modes
SOUND-TO-LIGHT MODE:
Let the beat of the music control the laser automatically
STAND-ALONE MODE:
The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX MODE:
The laser can be controlled with a standard DMX controller or DMX software.
MASTER-SLAVE MODE:
One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
The Laserworld BeamBar 10R MK3 is a bar with 10 single beam laser outlets, each equipped with a red laser diode (the bright and good visible red!), which means 10 x 120 mW / 638 nm.
Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.
This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different color hues and color fadings.
The Laserworld BeamBar 10R MK3 can be controlled through 13 DMX channels, so each diode can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.
Due to the standard DMX compatibility, the Laserworld BeamBar 10R MK3 can easily be integrated into an existing lighting setup.
This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The Laserworld BeamBar 10R MK3 is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.
> More details
Download Technical Datasheet
+41-71-6778080
+44-161-8720272
Distributed brands: