- 451. Laser Installation in Bangkok
- (Laserworld News EN)
- RTI implemented a permanent laser installation on the Rama VIII Bridge in Bangkok, Thailand. The laser show tells in bright colors the story of the Thai King and the bridge. Read more ...
- 452. The 2013 Revolution - Green Laser Diodes
- (Technical Explanations)
- Up to now, all white light laser projectors (RGB) have been equipped with DPSS laser modules (Diode Pumped Solid State), these laser sources are based on the “NLO” conversion (non-linear-optic) of an infrared ...
- 453. Graphics Show
- (G)
- What is a Graphics Show? Laser shows may either be designed as graphics or as beam shows. Beam shows project the laser beams into the room, while graphics shows use projection surfaces in order to display ...
- 454. Laser Installation @ Gold Club - Ho Chi Minh City, Vietnam
- (In Action: Lasers at Nightclubs, in Discos, in Bars)
- Massive laser setup in Gold Club in Ho Chi Minh City, Vietnam. They have: 1 x Laserworld PL-8000RGB 2 x Laserworld PL-6000RGB 14 x Laserworld CS-2000RGB and Phoenix Showcontroller software for laser ...
- 455. Laser Installation at New Club in Ho Chi Minh City, Vietnam
- (In Action: Lasers at Nightclubs, in Discos, in Bars)
- Another new Nightclub installation in Ho Chi Minh City with Laserworld/SwissLas Lasers 3 x SwissLas PM-1800RGB Show controller software: Phoenix Showcontroller The Installation has been done by our ...
- 456. Laser Safety Officer Training, Lengwil, Switzerland
- (In Action: Lasers in Showrooms and at Special Display)
- Despite rainy weather more than 20 laser fans arrived at the headquarters of the Laserworld (Switzerland) AG in Lengwil, Switzerland, for a laser safety officer training at October, the 10th 2013. The ...
- 457. New Exhibition Dates 2014 for Laserworld
- (Laserworld News EN)
- The next year is getting closer and we will exhibit at many shows in 2014. Click here to check the dates. Further dates will follow soon.
- 458. Laserworld goes for gold at the Peking Olympic Stadium
- (News, Press, PR)
- The prolight+sound in Frankfurt / Germany is one of the most important exhibitions for Laserworld. Thus every year Laserworld has an impressing booth there. The prolight+sound blog has published a detailed ...
- 459. Multimedia Show @ National Stadium Beijing
- (Laserworld News EN)
- Thousands of enthusiastic visitors have seen 'Attraction' in the Bird's Nest in Beijing / China. Click here to see the pictures of this great event. ...
- 460. Spider Laser Game – Fun with Laser Beams
- (In Action: Lasers in Showrooms and at Special Display)
- Many years of experience in the entertainment laser industry stimulate new ideas and solutions: Over the years requests have been made for a laser game that can be played, as there has been in many ...
- 461. BPM Show 2013 @ Birmingham
- (In Action: Lasers in Showrooms and at Special Display)
- At the BPM 2013 (14.09.-16.09.2013) in Birmingham, UK, Laserworld presented a succesful show with following set-up: Top row: 2xPM-1800RGB, 1xPM-1800RGB CT for graphics projecting to scrim Middle row: ...
- 462. Laser Installation @ Club M2 – Shanghai, China
- (In Action: Lasers at Nightclubs, in Discos, in Bars)
- The Club M2 is a very famous and trendy club in downtown Shanghai / China. Now the M2 has an extra attration: high end laser systems of RTI. Our partner Bocatec has done the installation. Following items ...
- 463. Laser-Consultant
- (Tools)
- Find the showlaser light system that matches your requirements with this tool. Of course, this cannot substitute any specialist counseling, but it gives a first impression. Please ask our experts for ...
- 464. Laserworld at Open Beatz Festival 2013 in Germany
- (News, Press, PR)
- ... stages, international top DJs and high end showlaser systems of Laserworld. Thousands of fans of the electronic music got great performances supported by professional laser, lighting and sound equipment. ...
- 465. Are there any differences between QuickShow and Pangolin Beyond?
- (Pangolin BEYOND FAQ)
- Beyond has a good number of additional professional features, such as an advanced multimedia timeline, advanced frame creation tools and advanced 3D modeling and animation capabilities. QuickShow was purposely ...
- 466. Is Pangolin QuickShow included with Beyond?
- (Pangolin BEYOND FAQ)
- Although some of Beyond's screens look like QuickShow, Beyond is a separate program; QuickShow is not included. Beyond builds on the significant user interface improvements that were introduced with ...
- 467. What are the differences between Pangolin Beyond and Pangolin Quickshow?
- (Pangolin Quickshow FAQ)
- Beyond has a good number of additional professional features, such as an advanced multimedia timeline, advanced frame creation tools and advanced 3D modeling and animation capabilities. QuickShow was purposely ...
- 468. Why do I have condensation inside my laser device?
- (Service and Warranty FAQ)
- Professional laser systems usually have cooling/heating elements built inside the projector. Although these are meant for keeping the laser modules at operation temperature, the climate inside the laser ...
- 469. GETShow Guangzhou 2013, China
- (News, Press, PR)
- May 2013 The LAVA magazine has published an article about the GETShow 2013 in Guangzhou, China, in its issue of May-August 2013. Laserworld exhibited at the GETShow, too. >>Click here for an extraction ...
- 470. How do laser lights create different colors?
- (Technical FAQ)
- With a fullcolor solid state laser, (at least) three different laser modules are used together. White light as well as mixed colors are generated by the additive color mixture of red, green and blue (like ...
- 471. Why do we have condensation inside our laser device?
- (Technical FAQ)
- Professional laser systems usually have cooling/heating elements built inside the projector. Although these are meant for keeping the laser modules at operation temperature, the climate inside the laser ...
- 472. I want to terminate the laser beam after about two metres, like the lightsabers in Star Wars. How can I do that?
- (Technical FAQ)
- It is not possible to create lightsaber like effects: You cannot "terminate" the laser beam somewhere, it can physically not be terminated without having an end-point (surface). Light can not be ended ...
- 473. Does Laserworld offer a white light star effect?
- (Diode Series)
- YES, please see one of our white light star effect lasers below - they can even do more different color shades. For professional applications, there are additional options for doing white light or multi ...
- 474. What does a dichroic filter in a laser projector?
- (Technical FAQ)
- The dichroic filter is used in an multi color laser system for combining the single colors to one beam. The dichroic filter deflects a certain color spectrum, whereas it lets pass others. Due to that it ...
- 475. My laser is only some months old and the beam gets a halo more and more. Is it defective?
- (Technical FAQ)
- Most probably not. The halo-effect normally occurs when the optics are not properly clean. You need to regularly clean you laser device, especially the optics, to ensure best output quality together with ...
- 476. The beams of the different colors of my CS-2000RGB laser appear to be slightly different in shape. Is there a defect?
- (Club Series)
- No, there is no error: As there are different technologies used to create laser light in different colors, the results are slightly different in cheaper projectors (this, however, applies for all cheaper ...
- 477. Can I link different lasers with DMX cables to forward the ILDA signal of the first unit?
- (Club Series)
- ... you can only use the ILDA signal. DMX is deactivated at the laser devices as soon as an ILDA signal is available. Buy Club Series show laser systems Here you can find all Laserworld Club Series ...
- 478. Can you link several lasers with DMX cables to forward the ILDA signal of the first unit?
- (Proline Series)
- ... mode, you can only use the ILDA signal. DMX is deactivated at the laser devices as soon as an ILDA signal is available. Buy Proline Series show laser systems Here you can find all Laserworld ...
- 479. Can I link several lasers with DMX cables to forward the ILDA signal of the first unit?
- (Diode Series)
- ... mode, you can only use the ILDA signal. DMX is deactivated at the laser devices as soon as an ILDA signal is available. Buy Diode Series show laser systems Here you can find all Laserworld Diode ...
- 480. Is your laser control software Apple / Mac compatible?
- (Technical FAQ)
- Phoenix Showcontroller and Pangolin do not run on MAC / Apple OSx. However, it is possible to operate all software products, that we offer, in a Windows emulated environment on Mac systems. There are ...
- 481. I got a brand new laser, but it doesn't work. What shall I do
- (Technical FAQ)
- ... plugged in (if there is a interlock connector, of course)? - is the key switch turned to "on"? - if there is a mechanical shutter: is it moved aside? - doese the laser only not work in one operation ...
- 482. Does Laserworld sell a white light star effect?
- (Evolution Series)
- YES, please see one of our white light star effect lasers below - they can even do more different color shades. For professional applications, there are additional options for doing white light or multi ...
- 483. How does the interlock work in Laserworld projectors?
- (Technical FAQ)
- The interlock is a safety option in laser projectors to provide a proper option to connect a safety shut-off button to the laser. The connector used with all Laserworld systems is a D-sub (DE-9) standard ...
- 484. Does Laserworld also sell a white light star effect?
- (Technical FAQ)
- YES, please see one of our white light star effect lasers below - they can even do more different color shades. For professional applications, there are additional options for doing white light or multi ...
- 485. Are laser beams visible even without haze and fog?
- (Technical FAQ)
- You always need a surface to reflect the laser light. This can be fog or haze for beam shows, or all kinds of screens for projections. Very common screen types are waterscreens, gauze screens, rear projection ...
- 486. Can you link different lasers with DMX cables to forward the ILDA signal of the first unit?
- (Technical FAQ)
- Of course not: DMX and ILDA are very different types of transmission protocols. DMX is very limited in its capabilities, so it's not suitable for any complex signal transmissions. If you work in ILDA ...
- 487. Why is there condensation inside our laser device?
- (General FAQ)
- Professional laser systems usually have cooling/heating elements built inside the projector. Although these are meant for keeping the laser modules at operation temperature, the climate inside the laser ...
- 488. How can I identify a very good and quality laser system?
- (General FAQ)
- It is very important that the laser light is in a good visible color spectrum as well as the diodes have a very low divergence. The beam diametre at aperture is normally not relevant, especially over longer ...
- 489. How can I evaluate the quality of a laser projector?
- (General FAQ)
- It is not the power that defines the quality of a showlaser system, but several other factors that dramatically influence quality and visibility. E.g. is a DS-1800RGB even better visible than a CS-2000RGB ...
- 490. What do I need to respect in terms of laser output power?
- (General FAQ)
- In order to compare lasers worldwide, it is common to specify the effective outputpower, which is the most important criterion for objective comparison of lasers. It is specified in Watt or milliwatt (1W ...
- 491. How does human eye perceive (laser) light?
- (General FAQ)
- ... with it. >>> read more >>> In a comparatively wide spectrum (ca. 405-465nm), blue colors can reach a radical increase in visibility by adding green laser light. This way the 445nm SwissLas modules ...
- 492. How are the different colors created with lasers?
- (General FAQ)
- With a full color solid state laser, (at least) three different laser modules are used together. White light as well as mixed colors are generated by the additive color mixture of red, green and blue (like ...
- 493. Why does Laserworld always give minimum and maximum values for their laser products?
- (General FAQ)
- It is physically not possible to give exact power values of showlasers, as several factors influence the power. Especially DPSS (Diode Pumped Solid State) laser modules are quite sensitive to exterior ...
- 494. How can Laserworld give a Lowest Price Guarantee for their projectors?
- (General FAQ)
- Laserworld sells over 4000 lasers per month. Due to that high volume and a strong worldwide dealer network it is possible to guarantee our dealers the very lowest price for comparable systems. As show ...
- 495. Why are laser projectors so expensive?
- (General FAQ)
- Lasers are cheaper than ever before: About 10 years ago, prices were at minimum 100.000 Euro for 5W RGB (or at least at that range). The units were water cooled and needed huge power supplies. So lasers ...
- 496. Can I make 3D projections in the air with lasers?
- (General FAQ)
- You always need a surface to reflect the laser light. This can be fog or haze for beam shows, or all kinds of screens for projections. Very common screen types are waterscreens, gauze screens, rear projection ...
- 497. Do I need fog or haze to make the laser beams visible?
- (General FAQ)
- You always need a surface to reflect the laser light. This can be fog or haze for beam shows, or all kinds of screens for projections. Very common screen types are waterscreens, gauze screens, rear projection ...
- 498. Do I need special knowledge to operate a laser projector?
- (General FAQ)
- In general there is no deeper knowledge necessary to operate a laser projector in a physical sense. However, laser light may be quite dangerous if it is not properly used. Due to the coherence of the ...
- 499. Is your laser control software Mac / Apple compatible?
- (General FAQ)
- Phoenix Showcontroller and Pangolin do not run on MAC / Apple OSx. However, it is possible to operate all software products, that we offer, in a Windows emulated environment on Mac systems. There are ...
- 500. Why is there condensation inside my laser device?
- (Installation & Setup FAQ)
- Professional laser systems usually have cooling/heating elements built inside the projector. Although these are meant for keeping the laser modules at operation temperature, the climate inside the laser ...
Distributed brands: